Tag Archives: merlin remote programming guide

How to program MERLIN M832 / M842 remote controls to original Merlin M852 standalone receiver?

Program to Gate / Garage Door Openers and Merlin standalone receivers just the same way as original MERLIN M832 / M842 remotes, please refer to your receiver’s user manual along with your gate kit. For a typical MERLIN M532 Standalone Receiver, the programming procedure is as follows. Make sure to install the battery in the transmitter correctly.
1. Press the small LEARN button on the receiver for 1-2 seconds.
2. Press the desired remote control button twice. ( with a short pause between two button press )
3. Press the transmitter button to test operation.
Note: After teaching / programmed twenty remotes, the most recently learned remote will be over-written. To remove a single transmitter’s code or all transmitter codes from the receiver memory please refer to your receiver manual.